2014 MCT 135C T4 VOLVO- JCB factory built.
Equipment Description
This unit is ready to work for the 2022 winter season with no maintenance needed. Single owner/operator since new purchase from Strongco. Unit languishes at dealership receiving service work. Perhaps arrangements can be made for viewing at service vendor. Parts & Service can be problematic in 2022! This lightly used unit was babied with motor replaced under warranty in 2020. The unit had 720 total hours on it from 2014-2022. It has never left the acreage while always shed stored. Regularly cleaned and washed the under-cab compartment/engine after every romp in the mud. Greased daily. During every job the unit was warmed up and after every project was allowed to cool for 15 to 20 minutes before shutting off. No gasket failures, leaks or drips. All gauges and controls operational and working. Enclosed cab with heater- AC unit condenser motor to be installed. NO DEF needed. All factory service manuals, documentation and shop repair manuals included both digital and paper. Factory specs: https://compactequip.com/skid-steers/volvo-skid-steers/ https://www.volvoce.com/global/en/product-archive/skid-steer-loaders/volvo/mc135c/ https://www.volvoce.com/-/media/volvoce/global/products/skid-steer-loaders/brochures/2013-11-productbrochure-mct85ctomct135c-t4f-final-new.pdf 72.6 engine horsepower, four-cylinder, turbo aspiration, 450 mm tracks, ISO/H pattern controls, auto idling, seat heater, radio, float function, pedal throttle and dial throttle, air ride seat, automatic front attachment button lock, backup alarm and beacon, 3012 pounds operating capacity , 7187 pounds breakout capacity. Operating weight 8430 pounds , to upload 6024 pounds , lift height 10’5” vertical , High flow, low flow, standard flow, seven way controls, high-speed, side entry. Heat and air conditioning controls. Lowball offers neither accepted nor considered. No financing. Receiving offers until this unit returns from the service department. We are not offering attachments with this unit, there is a new skid steer in our future. Short list of serviced and custom items: 1. New OEM motor in 2020 (Installed by Strongco) with 316 acreage work hours on it. 2. New main boom master cylinder seal 2022 3. Oil change 2022 4. Fuel tank flush 2022 5. Front bucket quick attach bushings and pins replaced 2022 6. Fuel, water separator, hydraulic and air filters 2021. 7. New factory glass front and right side 2022 8. Solid steel idlers both sides in 2020 9. LED light bars front and rear attached to steering controls. Factory side facing lights. 10. Main drive motors flushed, drained and oiled 2021 11. Third in-line fuel filter added 2022 12. Auto bucket disconnect harness replaced 2020. 13. New main fuel pump and filter assembly 2022 (see shop spares)
